OmniaTap xs touch

The intuitive all-rounder.
For H2O pure type I + II.

OmniaTap xstouch is the intelligent compact system with intuitive touchscreen operation when both pure and ultrapure water is required in small quantities.

The combination of state-of-the-art treatment techniques enables the extraction of pure and ultrapure water from just one system. It can be connected directly to a drinking water pipe. The flexible dispenser is used to extract category I ultrapure water. The removal takes place at the push of a button via the digital control of the dispenser.

The adaptable pure water tanks with a volume of 7, 30 or 60 liters enable the continuous withdrawal of type II laboratory water for other applications.

image not found Request a Quote
Key Features
- OptiFilltouch dispenser is standard
- Simple and economical filter change
- Leakage sensor is standard
- Integrated pressure reducer is standard
- Precise volume control
- Ready-to-use, including filter cartridges
OptiFill touch Dispenser
Make optimum use of the valuable space in your laboratory and position the production unit under the bench. With the external dispenser and monitoring unit OptiFilltouch Table / Wall, you can adapt the positioning to your laboratory environment. Whether practically standing on the laboratory bench or space-saving on the laboratory wall.
Specification of Pure water values type II
Parameters OmniaTap xstouch 8 UV-TOC OmniaTap xstouch 8 UV-TOC/UF
Pure water performance at 15 °C [l/h] 8 8
Conductivity at 25 °C [µS/cm] 0.067 up to 0.1 0.067 up to 0.1
Resistance at 25 °C [MΩ x cm] 15 up to 10 15 up to 10
Specification of Ultra pure water values type I
Parameters OmniaTap xstouch 8 UV-TOC OmniaTap xstouch 8 UV-TOC/UF
Conductivity at 25 °C [µS/cm] 0.055 0.055
Resistance at 25 °C [MΩ x cm] 18.2 18.2
TOC-value* [ppb] < 5 < 5
TOC monitor yes yes
Dispensing performance [l/min.] up to 2 up to 2
Individually adjustable dispensing volume [liters] 0.05 up to 25 0.05 up to 25
Particles** > 0.2 µm [1/ml] < 1 < 1
Bacteria** [CFU/ml] < 0.01 < 0.01
Pyrogens (Endotoxins)*** [EU/ml] - < 0.001
RNase*** [pg/ml] - < 1
DNase*** [pg/ml] - < 5
Proteases*** [µg/ml] - < 0.15
* The values given are typical and may vary depending on the quality of the feed water ** With sterile filter capsule 0.2 μm or bio filter capsule *** With ultrafilter/bio filter capsule
Technical Table
Parameters OmniaTap xstouch 8 UV-TOC OmniaTap xstouch 8 UV-TOC/UF
Feedwater connection R3/4″ R3/4″
Electrical connection [Volt/Hz] 90 – 240/50 – 60 90 – 240/50 – 60
Connected load [W] 120 120
Ambient temperature [°C] 4 up to 40 (Recommendation: 10 up to 25) 4 up to 40 (Recommendation: 10 up to 25)
Printer port RS232 RS232
Data port USB-A USB-A
Dimensions without tank* [W x H x D mm] 240 x 530 x 435 240 x 530 x 435
Dimensions with 7 l docking tank* [W x H x D mm] 253 x 530 x 520 253 x 530 x 520
Weight dry [kg]* 17 17
Dimensions procuction unit without tank*** [W x H x D mm] 240 x 415 x 310 240 x 415 x 310
Dimensions procuction unit with 7 l docking tank*** [W x H x D mm] 253 x 420 x 435 253 x 420 x 435
Weight production unit dry [kg] 16 16
Dimensions OptiFill touch wall dispenser [W x H x D mm] 90 x 482 x 337 90 x 482 x 337
Weight wall dispenser [kg] 1 1
Dimensions OptiFill touch bench dispenser [W x H x D mm] 250 x 650 (750**) x 380 250 x 650 (750**) x 380
Weight bench dispenser [kg] 3 3
With OptiFilltouch dispenser With extension Under table variant
OmniaTap-xs-touch-Blueline-Pure.pdf
Download