Request a Quote Key Features
- OptiFilltouch dispenser is standard
- TapWater-Set – direct tap water connection
- Tank volume display in percent
- Simple and economical filter replacement
- Leakage sensor is standard
- Ready-to-use, including filter cartridges
OmniaTap
The powerful all-rounder.
For H2O pure type I + II.
OmniaTap is the all-rounder with integrated reverse osmosis incl. circulation tank for type II pure water and cost-effective ultrapure water generation type I.
The combination of state-of-the-art treatment techniques enables the extraction of pure and ultrapure water from just one system. It can be connected directly to a drinking water pipe. The flexible dispenser is used to extract category I ultrapure water. The removal takes place at the push of a button via the digital control of the dispenser.
The optional storage tank (10, 30 or 60 litres) with recirculation keeps the quality permanently at type II. Downstream terminals can be supplied via an optional pressure output on the pure water tank.
Specification of Pure water values type II
| Parameters | OmniaTap | OmniaTap UV-TOC | OmniaTap UV-TOC/UF |
|---|---|---|---|
| Pure water performance l/h at 15 °C | 12 or 20 | 12 or 20 | 12 or 20 |
| Conductivity [μS/cm] | 0.067 up to 0.1 | 0.067 up to 0.1 | 0.067 up to 0.1 |
| Resistance [MΩ x cm] | 15 up to 10 | 15 up to 10 | 15 up to 10 |
| Parameters | OmniaTap | OmniaTap UV-TOC | OmniaTap UV-TOC/UF |
|---|---|---|---|
| Conductivity at 25 °C [µS/cm] | 0.055 | 0.055 | 0.055 |
| Resistance at 25 °C [MΩ x cm] | 18.2 | 18.2 | 18.2 |
| TOC-value* [ppb] | < 10 | < 5 | < 5 |
| TOC monitor | no | yes | yes |
| Dispensing performance [l/min.] | up to 2 | up to 2 | up to 2 |
| Individually adjustable dispensing volume [liters] | 0.05 up to 25 | 0.05 up to 25 | 0.05 up to 25 |
| Particles** > 0.2 µm [1/ml] | < 1 | < 1 | < 1 |
| Bacteria** [CFU/ml] | < 0.01 | < 0.01 | < 0.01 |
| Pyrogens (Endotoxins)*** [EU/ml] | - | - | < 0.001 |
| RNase*** [pg/ml] | - | - | < 1 |
| DNase*** [pg/ml] | - | - | < 5 |
| Proteases*** [µg/ml] | - | - | < 0.15 |
| The values given are typical and may vary depending on the quality of the feed water | - | With sterile filter capsule 0.2 µm or bio filter capsule | With ultrafilter/bio filter capsule |
| Parameters | OmniaTap | OmniaTap UV-TOC | OmniaTap UV-TOC/UF |
|---|---|---|---|
| Feedwater connection | R 3/4″ | R 3/4″ | R 3/4″ |
| Electrical connection [Volt/Hz] | 90 – 240/50 – 60 | 90 – 240/50 – 60 | 90 – 240/50 – 60 |
| Connected load [kW] | 0.1 | 0.1 | 0.1 |
| Ambient temperature [°C] | 4 up to 40 (Recommendation: 10 up to 25) | 4 up to 40 (Recommendation: 10 up to 25) | 4 up to 40 (Recommendation: 10 up to 25) |
| Dimensions without tank* [W x H x D mm] | 390 x 720 x 525 | 390 x 720 x 525 | 390 x 720 x 525 |
| Dimensions with 10-l docking tank* [W x H x D mm] | 390 x 720 x 615 | 390 x 720 x 615 | 390 x 720 x 615 |
| Weight without 10-l docking tank [kg] | 17 | 18 | 18 |
| Weight with 10-l docking tank [kg] | 20 | 21 | 21 |
| With OptiFill Dispenser | With OptiFill Dispenser | With OptiFill Dispenser | With OptiFill Dispenser |